 |
|
Resilient seated Gate Valve |
| Characteristic of Product |
 Integral rubber-clad disc: The ductile iron framework is thermal-clad integrally with high-perfomance rubber ,ensuring a tight seal and free from rust |
| Flat-bottom seat:The sealing surface of the body is flat without hollow,avoiding any dirt deposit |
| Wholly-throught flow channel:The whole flow channel is through,giving "zero" pressure loss |
| Epoxy resin coating:The cast is sprayed with epoxy resin coat both inside and outside ,and the disc is wholly clad with rubber in accordance with food hygiene requirement ,so it is safe and resistant to corrosion. |
|
|
- Techical Specification
- Products Standards
- Type of Actuators
- Materials of Main Parts
- Dimensions and Weight
- Other
Ordering the product |
1.This product is in accordance with ANSI/AWWA C509-94¡¶Resilient-seated Gate Valves for Water Supply Service¡·.
2.Tests are in accordance with GB/T13927-1992¡¶Pressure Testing for General Purpose Valves¡·
3.Side flange connection is in accordance with the regulation for PN1.0MPa,PN1.6MPa,given in GB/T17241.6-1998¡¶Intergal Cast Iron pipe Flanges¡·
4.Face to face dimensions are in accordance with the regulation for short body series gate valves given in GB/T12221-1989 ¡¶Metal Valves for use in Flanged Pipe Systems-Face-to-Face and Center-to-face Dimensions¡·
5.Side flange connection dimensions of DN65(2 1/2")~300(12")are accordance in with the regulation for grade 125 pound given in ANSI/ASME B16.1¡¶Cast Iron Pipe Flanges and Flanged Fittings¡·.
|
Manual and electric actuators and available and selected by custormers.For manual type,rotate wheel clockwise the valve is close and vice versa.
|
Resilient seated Rising Stem Gate Valve Z41X-10/16 Z941X-10/16 DN40-600 |
 |
| |
|
Resilient seated Non Rising Stem Gate Valve Z45X-10/16 Z945X-10/16 DN40-600 |
 |
ÔÝÎÞOtherÄÚÈݽéÉÜ |
|
